***PRICE IS FOR ONE CARTRIDGE ONLY***
This filter cartridge is used in Artesian spas only.
This filter cartridge must be cleaned on a regualar basis. We recommend weekly cleaning.
Dimensions:
Height = 204mm
Diameter = 165mm
These are the steps needed to successfully replace your filters.
1. Turn off all power to your spa and remove the filter lid by lifting it out towards you.
2. Turn the filter counterclockwise and remove it from the filter well.
3. Replace with new filter.
4. Place the new filter into position and turn clockwise to fasten. DO NOT over-tighten.
5. We recommend the use of a quality filter soak product, such as Renew.
WARNING: Power to your spa must be turned off prior to removing your filters. The suction at the filter is extremely strong and can cause injury if there is no filter. NEVER run your spa without the filters properly installed. Injury to person and damage to the equipment can occur. Any damage to equipment due to this circumstance will not be covered under warranty.
*** Note: Please choose carefully as returns can not be accepted if filters have been placed in water. ***
(109518)
SKU | 109518 |
Brand | Artesian® |
Shipping Weight | 0.9500kg |
Shipping Width | 0.180m |
Shipping Height | 0.240m |
Shipping Length | 0.180m |
Shipping Cubic | 0.007776000m3 |
Unit Of Measure | ea |
Be The First To Review This Product!
Help other Endless Spas users shop smarter by writing reviews for products you have purchased.